Nitrogen Disposable Bottle / Mini Nitrogen Regulator - Cold Brew Coffee / Stout

Is it easy to set up if you're a beginner you've never used one of these before (the tank and regulator)? Do you need special technical knowledge or are there instructions online?

Hi Maria
Yes - Pretty easy to setup and run.  We have instructions on line too.
If you have any specific questions you can give us a call or email directally. Happy to help out.
Cheers
Andrew.

I have a WT Farley nitrogen regulator will it fit on this bottle

Hi there.
If it has a 10mm threaded female inlet port then yes it should fit. 
If you want to send through some images to info@ikegger.co.nz to help confirm then go for it.
Cheers.

if you please i want to know how to use nitrogen for flushing solution for anaerobic fermentation&and which type and precautions. Thanks in advance.

Hi Doaa -
Sure, give me call on 021 43 48 46 to discuss if you like.  Happy to help out.

What is the new brand of nitrogen? And also is it dry nitrogen (no water in the formula)? Thank you

Hi Louise -
he Brand is Tesuco - They are Italian made. Min 99.995% pure nitrogen.  I would say yes no water in them. Here is a link : http://www.tesuco.com.au/media/84646/DIS_CY_NI_V03.pdf Thanks - anything else you need let us know. Cheers.

Hello. Can this size gas cylinder be transported safely in a car? Thanks!

Yes for sure - its only the size of a 2L soda bottle. Always good to pack things well when transporting however.

Hello I really want to use nitro. On my stout , I have a kegg 10 from WW, and would like to know what do I need to add nitro.👍thanks

Hi Alex - Thanks for the message - All you would need is the $200 kit above (cylinder and gas) It comes with a gas line and disconenct do you can clip it directally onto your keg for serving.  When not serving you will need to clip your co2 line back on to keep the keg from loosing carbonation.  We can also supply a full size nitrogen reg and re-fillable cylinder but they you would be looking in the $450+ range.  OUr mini kit here is more portable and a good way to try nitro out.   Let me know if we can be of any further help. Cheers. 

Hello, I'm currently working on a food product and need to use liquid nitrogen. I have no idea where to look because I'm only after a cylinder to sample how it would work with my product. Any advice on where I can get a relatively small cannister to start with? Many thanks, Katie Allan

Hi Katie -  Liquid nitrogen is quite different to compressed gas nitrogen.  We only stock the compressed gas type. Normally liquid nitrogen is held in a special cryo container. They are rather pricey too. Give these guys a call and ask them where you can get them filled.  Or maybe rent one from them?
http://www.cryocontainers.co.nz/ or You could try giving coregas.co.nz a call as they say on their website they deal with liquid gasses.   Or BOC or maybe some pharmaceutical establishments may have smaller amounts. or www.airliquide.com/new-zealand or one of the local universities.. Best of luck!
Andrew.

can I use the mini regulator 0n a type D nitrogen bottle and could I fit a flow meter by removing one of the gauges?

No this mini reg cant be used on a full size nitrogen bottle.  You will need a type 50 regulator for that. Like this:

https://www.ikegger.co.nz/collections/nitro-kits/products/nitrogen-regulator-mk4-type-50-n2-dual-gauge

Yes you could fit a flow meter if you had the right size thread on it  - if only a low flow needed though you get away with using the reg as it is with the PSI guage

can a flow meter be attached to this?

Edit - Hi Andy - We are looking at a local supplier who may be able to put flow meters on full size Nitrogen regs for us for use with full size re-fillabel cylinders.  If you still need one let me know. 

Original: If you already have your own flow meter then sure it could be added on no probs.

Hi, How many litres of nitrogen are in this bottle? Cheers

Hi James - Details below:  Cheers

2.2L of Nitrogen (tank capacity)
Gas Volume 0.22m3